The cenospheres are also used in the construction industry for the manufacture of ultra-light and aerated concrete.The cementitious mixtures are used in combination with the cenosphere additives as follows;Cenospheres may substitute some amount of the sand in the concrete composition of a standard m

The Al2O3 content, sintering temperature, and impurities such as TiO2 and FeO3 in bauxite have a significant impact on the coating. Therefore, it is necessary to select ores with high Al2O3 content for 1450-1500 calcination, select clinker grinding, and make them into fine powder. After acid washing

The purpose of a refractory material is to withstand the high temperatures required in furnaces, kilns, incinerators, power plants etc without contaminating other materials and to conserve heat in the area where it is needed. Dense refractories are heavy with low porosity but high mechanical strengt

With the rapid development of the petroleum industry, the demand for oil well cement used in oil and gas well cementing engineering is also constantly increasing. Especially due to the deepening of well depth and poor geological conditions, the demand for low-density oil well cement is even more urg

Bauxite is one of the most important industrial minerals and it being the aluminium ore, is the principal raw material for the production of alumina. The simple beneficiation process and proper quality control work can produce good metallurgical grade Bauxite. The simple beneficiation process which

Cenospheres in Paints and CoatingsThere are a great many uses for cenospheres in the paint and industrial coating industry, due to the additional qualities they provide. For example, cenospheres are often used in coatings to control infrared radiation, giving those coatings an advantage over ones th

Always keep the working environment free of dust and debris. Especially in the case of waterjets as they are operated in an environment filled with garnet abrasives. So, you have to be cautious about keeping everything clean as much as you can. This will significantly reduce your repair and maintena

Garnet abrasives come in a variety of shapes, however, the correct garnet abrasive for your application will depend on the material you’re cutting and the desired finish. For example, if you’re cutting metal, a garnet abrasive with a sharp, angular shape will be best suited for the job. On the other

High alumina bauxite is one of the main raw materials in the welding flux industry. SEPPE bauxite undergoes fixed point beneficiation, strict sorting, high-temperature calcination, and low-temperature discharge to ensure the refractory and toughness of the product. Before processing, bauxite is stri

When it comes to cutting materials, nothing beats a waterjet. The sophisticated design of a waterjet makes it the ideal machine for precise cutting and shaping, especially when you need to cut through difficult-to-cut metal alloys.Waterjets have the ability to generate tremendous amounts of force an