Fluorite, also known as fluorspar, is the main source of fluorine in industry, and is one of the 20 important nonmetallic mineral raw materials in the world. It is widely used in metallurgy, aluminum smelting, glass, ceramics, cement, chemical industry. The pure, colorless and transparent fluorite c

waterjet Abrasives make up one of the most important components in the waterjet cutting process.

White fused alumina is made of high-quality bauxite, which is smelted in an arc at a high temperature of more than 2000 degrees and then cooled. It is suitable for the manufacture of ceramics, resin bonded abrasives, grinding, polishing, sandblasting, precision casting, etc. It can also be used to m

Fluorspar powder(Fluorite powder) can be divided into dry powder and wet powder.Fluorspar powder used in chemical industry generally requires calcium fluoride content of more than 97%, so most of fluorspar powder is prepared by flotation. By adding various chemical agents, calcium fluoride can be ef

River garnet through the impact of water, is a natural abrasive. Hardness, and more smooth, less damage to materials and machines.Compared with rock garnet, river garnet sand can keep the cutting surface smooth and flat. Because river sand is formed after a long time of impact, so its grain edge sur

SEPPE garnet includes rock red garnet and river pink garnet. Both of them can be used for sandblasting and water jet cutting.Rock garnet can be used in cutting harder materials and the cut surface is not so smooth but more efficient.River garnet can keep the cut surface more smooth and the bulk dens

■Calcined Bauxite for refractory materialSuch calcination of bauxite has the properties of high alumina, low iron, high hardness, small thermal expansion coefficient, high refractoriness, and stable thermal chemical performance, so it is the main raw material of producing alumina and artificial coru

SEPPE White fused alumina can be used for refractory and abrasive.It has high harness (Mohs hardness can be 9) which is suitable for wet blasting.High tempertaure resistance and high purity can be added into refractory materials.It can effectively improve the performance of refractories, improve the

SEPPE Waterjet Cutting Garnet 80 mesh is extensively used in waterjet cutting machines around the world. The highest purity garnet and highly accurate sizing of grains are produced using the world best processing methods.This ensures that there are no dust or ineffective fine grains that can restric

Fluorite powder is not simply processed and ground into powder.Fluorspar powder used in chemical industry generally requires calcium fluoride content of more than 97%, so most of fluorspar powder used in chemical industry is prepared by flotation. By adding various chemical agents, calcium fluoride