Bauxite used in refractory applications is generally calcined in a rotary kiln producing a material mainly consisting of corundum (alpha-Al2O3), mullite (3Al2O3.2SiO2) and a small amount of a glassy phase.So it is an artificial aggregate with higher strength and hardness than natural bauxite. Such c

Cenosphere is a new type of functional material newly developed in recent years. It has a wide range of applications in building materials, machinery, metallurgy, petroleum, and chemical industries and fields.It has many excellent characteristics such as wear resistance, non-toxicity, dispersibility

The bauxite referred to in the refractory industry usually refers to bauxite clinker (calcined bauxite) with Al2O3>=48% and low Fe2O3 content after calcination.The calcined bauxite is gray, light yellow and dark gray. The particle size can be unprocessed particle size, coarse particle, or section sa

SEPPE calcined bauxite is produced by calcining of low iron, low alkali containing raw bauxites at temperatures of 1600 - 1800 degree Celsius. This removes moisture thereby increasing the alumina content.Refractory grade bauxites have a high alumina content and a very low alkali content with low imp

There are a great many uses for cenospheres in the paint and industrial coating industry, due to the additional qualities they provide. For example, cenospheres are often used in coatings to control infrared radiation, giving those coatings an advantage over ones that merely attempt to limit thermal

Structurally, cenospheres are hollow spherical-shaped particles that resemble glass beads, micron-balloons, or hollow ceramic micron-sized spheres.The spherical shape of SEPPE cenospheres creates a low surface area tovolume ratio, which requires less resin, binder and water to wetout the surface. Th

There is a relation between the cutting speed and the garnet mesh. Bigger mesh abrasive can make the cutting process slightly faster. However, you will get a rough finish. The most commonly chosen option for waterjet cutting is 80 mesh. The abrasive size does not have much impact on the thin aluminu

High friction surfacing is a highly effective surface treatment which can increase the skid resistance.After processing, calcined bauxite has better physical hardness and stability, thereby improving its own excellent resistance to abrasion, and is an ideal choice for high friction surface coatings.

Bauxite used in refractory applications is generally calcined in a rotary kiln producing a material mainly consisting of corundum (alpha-Al2O3), mullite (3Al2O3.2SiO2) and a small amount of a glassy phase.So it is an artificial aggregate with higher strength and hardness than natural bauxite. Such c

Industries such as oil and gas, building, plastics, aerospace, automotive, and surface coating continue to be some of the leading consumers of cenospheres and new application areas are being devised at an encouraging pace. Owing to their natural properties, SEPPE cenospheres can be used in forms suc