Dustless Waterjet Pink Garnet

Dustless Waterjet Pink Garnet 

Low‑dust natural pink alluvial garnet abrasive, specially processed for clean waterjet cutting with minimal airborne particles. Ideal for stainless steel, stone, glass, and composites.

---

★ Hardness 7.5-8.0 Mohs

★ Low Chloride ≤25 ppm

★ High Density 4.0-4.2 g/cm³

◆ Dust‑Controlled Process

◆ Consistent 80 Mesh Cut

◆ Smooth Burr‑Free Finish

ISO 9001:2015 Certified · Exported to 40+ Countries

   Download Technical Data Sheet

What Is Dustless Waterjet Pink Garnet?

▸ Dustless waterjet pink garnet is a premium alluvial garnet abrasive that undergoes extra washing and classification to remove ultra‑fine particles, significantly reducing airborne dust during cutting.

▸ It is widely used in abrasive waterjet systems for cutting stainless steel, titanium, stone, ceramics, and composite materials, where a cleaner work environment is desired.

▸ Its natural pink color indicates high purity and low impurity levels, while the sharp angular grains maintain stable cutting performance and low abrasive consumption.

Typical Waterjet Cutting Applications

SEPPE dustless pink garnet is especially suited for indoor waterjet workshops, confined cutting cells, and applications where operator visibility and low dust emission are critical.

   

Production Process

▸ Raw alluvial garnet → Washing & Desliming → Gravity Separation → Drying → Magnetic Separation → Precision Screening → Dust‑Control Treatment → Final Inspection & Packaging

▸ The additional dust‑control step removes remaining micro‑fines, resulting in a cleaner cutting operation without compromising abrasive flow.  

Laboratory Testing & Quality Control

▸ SEPPE performs particle size analysis, dust level measurement, and screening verification on every production batch.

▸ Moisture testing, bulk density checks, and impurity inspection help maintain stable abrasive flow and low dust emission.

▸ Strict batch inspection helps reduce oversized particles, excess dust, and unstable feeding during long cutting cycles.

   

Why SEPPE Dustless Pink Garnet Quality Matters

▸ Extra dust‑control processing keeps the work area visibly cleaner and reduces operator exposure to airborne particles.

▸ Precise sizing helps reduce abrasive feed blockage and nozzle wear.

▸ Low chloride content helps minimize rust on cut metal surfaces.

▸ Stable bulk density supports consistent abrasive feeding during long cutting cycles.

▸ Strict batch testing means you get the same low‑dust performance every time.

SEPPE Garnet vs Typical Slag Abrasive

Packaging & Delivery

▸ 25 kg PP woven bags and 25 kg paper bags available

▸ 1 MT jumbo bags for bulk supply

▸ OEM private label and custom packaging supported

▸ Reliable container shipment to all major ports worldwide

FAQ

❓ Why is this garnet called “dustless”?

▸ It undergoes an extra washing and classification step to remove micro‑fines, which greatly reduces airborne dust during cutting operations.

❓ What is the best garnet mesh for stainless steel cutting?

▸ 80 mesh is commonly used. For thinner materials, 100 mesh may be preferred.

❓ Does the pink color affect cutting performance?

▸ No. The natural pink color is due to mineral composition and does not impact hardness or cutting speed.

❓ Can garnet be recycled in waterjet systems?

▸ Depending on the application, garnet can be recycled 3-5 times before replacement.

❓ Will garnet cause rust on cut metal surfaces?

▸ No. SEPPE garnet has extremely low chloride content, preventing rust on stainless steel.

❓ Can I request samples and technical documents?

▸ Yes. Free samples, TDS, and SDS are available upon request.