You are here: Home » Products » GARNET » Blasting Garnet » Red Garnet Sand Abrasive For Blasting

Product Details

Red Garnet Sand Abrasive For Blasting

Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. Alluvial garnet grains which are rounder are more suitable for such blasting treatments.
Availability:
Quantity:
sharethis sharing button
  • 20/40 30/60 mesh

  • SEPPE GARNET

  • 25132000


Introduction

Garnet sand is a common chemical inert nonmetallic mineral in natural environment. Garnet as a kind of natural abrasive, because of its hardness, high specific gravity, chemical properties and durability become the ideal blasting media on the market. It has the characteristics of non-toxic, low dust, no pollution which is often used as a sandblasting abrasive. Common uses have hardware sandblasting and surface cleaning.  As one of the leading garnet abrasive suppliers in north China, our garnet has been tested by QC, and has particle size analysis, quality assurance.



Chemical Composition & Physical Property

Chemical Composition
Al2O3
17-25%
SiO2 34-40%
FeO+Fe2O3 28-31%
MgO 5-8%
MnO 0-1%
TiO2 0-1%
CaO 1-2%
Physical Property
Bulk Density 2.1-2.4g/cm3
Specific Gravity 4.0-4.2g/cm3
Hardness 7.5-8.0 Mohs
Common Size
20/40, 30/60...




Garnet for blasting

Garnet abrasive sand is in the most potential and widely used abrasive field, because it is used in the industries that are closely  related to the production, such as ship hull, bridges, pipes, steel structures, machine and parts, etc. Garnet has a large sandblasting area per unit time, less sand consumption, and lower sandblasting costs.


Its hardness can reach 8 mohs with long service life, can be cleaned on the metal surface to produce ideal angular rough surface, increase the surface area of the metal, improve the bonding force of the interface, so that the adhesion of the corrosion protection coating and the metal surface is significantly enhanced, so as to improve the bonding performance of the coating and the metal surface.


High density with stronger impact force, can better clean the metal surface. Garnet has sharp edges and corners, reasonable particle size distribution, and less dust. It can effectively go deep into holes and uneven parts for cleaning, and completely remove scale, rust, soluble salt and other dirt. Main size for sandblasting is 30/60 mesh and 20/40 mesh.



Package and Delivery



garnet package