| Quantity: | |
|---|---|
0.8-3.0mm
72051000
Introduction
Steel Wire Cut Shot is manufactured from high-carbon steel wire via precision cutting, deburring, quenching & tempering heat treatment and accurate grading, with short cylindrical particle shape. It owns complete metallic fiber structure, outstanding impact resistance and balanced cutting performance, filling the performance gap between cast steel shot and cast steel grit.
Typical Specification
| Main Size | |||||
| 0.8mm | 1.0mm | 1.2mm | 1.5mm | 2.0mm | 2.5mm |
| Chemical Composition | |||||
| C | Si | Mn | P | S | / |
| 0.45-7.0% | 0.15-0.35% | 0.30-1.30% | ≤0.04% | ≤0.05% | / |
| Hardness | Denisty | Apparent Density | |||
| HRC41-45/42-53 | ≥7.8g/cm3 | 4.5g/cm | |||
| Ervin Life Cycle: 3300-3600 cycles | |||||
Key Advantages
1. Fiber metallurgical structure eliminates casting porosity, extremely low fragmentation rate during repeated blasting, excellent recyclability;
2. Dual performance of impact & cutting: effectively strip heavy rust and aged coating without excessive gouging on thin base metal;
3. Perfect for harsh working conditions: damp workpieces, rusty outdated steel structure refurbishment, heavy casting descaling;
4. Low dust emission, less abrasion on shot blast machine spare parts.
Application
1. Construction & mining machinery: Bucket, track shoe, heavy casting descaling & shot peening;
2. Ship repair & used steel renovation: Remove thick old paint and severe corrosion from hull plate & storage tank;
3. Auto forging, springs & chains: Remove heat-treatment scale and release residual stress;
4. Rolling mill & large mold surface texturing;
5. Heavy foundry casting shakeout & sprue cleaning.
Selection Tips
Thin sheet & precision parts: Φ0.8~1.2mm soft grade;
General steel & auto component mass production: Φ1.2~1.5mm medium grade;
Thick plate & heavy rust removal: Φ2.0~3.0mm high hardness grade.
