Garnet abrasive sand is in the most potential and widely used abrasive field, which can be cleaned on the metal surface to produce ideal angular rough surface.Therefore it is used in the industries that are closely related to the production, such as ship hull, bridges, pipes, steel structures sandb

Fluorspar powder can be divided into dry powder and wet powder. Fluorspar powder used in chemical industry generally requires calcium fluoride content of more than 97%, so most of fluorspar powder is prepared by flotation. By adding various chemical agents, calcium fluoride can be effectively collected.

The main component of fluorspar is CaF2, which is the main source of fluorine（F）in industry.The process of fluorspar lumps is relatively simple. After the natural fluorite ore is exploited, they will be directly processed into the size required by customers through physical processing. Generally, th

One of the main conditions for achieving waterjet cutting is garnet abrasive, which has high grinding efficiency, wear resistance and durability, is not easy to jam the nozzle, and has high surface brightness.

Water cutting is realized by using the hardness difference between the abrasive and the workpiece to be grinded. The higher the hardness of garnet abrasive, the stronger its cutting ability.The hardness of SEPPE'garnet is 7.5-8mohs.Garnet is a chemically inert material that hardly reacts with cuttin

Bauxite powder casting coating affects the internal and surface quality of the casting. The refractory filler is the main component of the casting coating, which determines the fire resistance, chemical stability and thermal insulation of the coating, and also has an important impact on the permeabi

Calcined bauxite is one of the principal ore of aluminum，which is obtained by calcining (heating) superior grade bauxite at high temperature (from 850℃ to 1600℃).Through calcination, the density and refractory resistance will also be improved to varying degrees.

Water cutting is a cutting method with excellent performance. The main advantage is that it will not generate heat, and the cutting speed is very fast. In addition, the complexity of the cutting pattern is difficult to achieve by other methods.

The hardness of garnet is between 7.5-8.0, which is very large.In recent years, it has been used more and more in the flooring industry. The natural carborundum is evenly distributed on the concrete surface at the initial setting stage. After the overall curing, it can form a dense, integral, super-

Bauxite powder belongs to industrial clay and is a non-metallic ore. It is composed of extremely fine crystals. The rock forming is massive, hard and dense, and has the function of resisting high temperature. In industry, it is mainly used to manufacture high alumina refractories with high refractor