Bauxite is mainly used for refractories, and its fire resistance depends on its chemical composition. The content of Al2O3 in bauxite, sintering temperature, TiO2, FeO3 and other impurities have a great impact on the coating.In addition, the particle size and size distribution of bauxite are also im

River garnet sand is formed after a long time of impact, so its grain edge surface is more rounded, less damage to the material. Mixed with very high pressure water, garnet is used to cut steel and other materials in water jets. It can meet the needs of high cutting speed and smooth cutting surface

High quality alluvial garnet does not contain any fracture lines that weaken the inherent garnet grain crushed.A steady flow of garnet abrasives to the focusing tube that is free from blockages allows uninterrupted production without downtime resulting in optimum efficiency and lowest production cos

The bauxite is calcined at high temperature and baked at low temperature, which ensures the refractoriness and toughness of the product. The bauxite is strictly checked before processing to remove inferior and impurity. The product has the advantages of high alumina content and low sulfur and phosph

As a common placement for silica sand in sand blasting, garnet grains are better for their high hardness, acid and alkali resistance.

Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot.

White fused alumina is one of the most widely used raw materials for so many industrial fields, including refractory, bonded abrasives and coated abrasives industries.

Garnet abrasive sand is in the most potential and widely used abrasive field, which can be cleaned on the metal surface to produce ideal angular rough surface.Therefore it is used in the industries that are closely related to the production, such as ship hull, bridges, pipes, steel structures sandb

Fluorspar powder can be divided into dry powder and wet powder. Fluorspar powder used in chemical industry generally requires calcium fluoride content of more than 97%, so most of fluorspar powder is prepared by flotation. By adding various chemical agents, calcium fluoride can be effectively collected.

The main component of fluorspar is CaF2, which is the main source of fluorine（F）in industry.The process of fluorspar lumps is relatively simple. After the natural fluorite ore is exploited, they will be directly processed into the size required by customers through physical processing. Generally, th