Surface preparation plays a critical role. Neglecting this stage can result in up to 80 to 85% of coating failures, underscoring the need for meticulous attention to detail.Ultimately, you will not only achieve the optimal materials consumption rates but also keep wear and tear on your [waterjet par

No matter whether you are cutting or blasting, performance is everything.For many years, SEPPE has been committed to helping our customers maximize their performance onsite. Our garnet is a natural mineral that outperforms other abrasives due to its unique hardness, toughness, density and angularity

For maximum cutting performance, you need a good bag of garnet that is:- Clean- Hard- Consistently sizedA bag that contains a high percentage of garnet, and that is the right grade for your project.Explore the advantages of pure, consistently high quality garnet for your waterjet cutting projects.Pl

The type of garnet abrasive used by your waterjet machine also plays a vital role in achieving operational cost efficiencies, optimal cutting speed and cutting edge quality.At SEPPE we’ve spent a lot of time globally understanding how our products perform and compare that with other abrasives and ho

Many factors determine whether you’ll make the right cut, but none is more important than choosing the right abrasive.The main advantages of waterjet cutting for steel applications:- No thermal impact at the cutting edge- Virtually no heat impact, no material change, no oxidation- Excellent cutting-

Waterjet sand, full name of water jet cutting abrasive. Mixing sand into water flow to form waterjet abrasives to cut metal or other materials. Waterjet sand with particle size of 30-150 mesh is usually used as abrasives. Garnet with particle size of 80-100 mesh is the most commonly used.The propert

SEPPE garnet sandblasting abrasive has high hardness, long lifetime, high efficiency, low consumption and high recycling rate.In the process of surface preparation, SEPPE garnet is blasted on to the surface of the steel with the use of high pressure compressed air. This process is called sand blasti

Brown corundum is an artificial abrasive, while garnet is a natural abrasive;Brown corundum is made by bauxite and in a 2200 ℃ electric arc furnace at high temperature. It is brownish red or reddish brown.Garnet abrasives are extracted from rock minerals and processed into various particle sizes th

Waterjet cutting, that is, high-pressure water jet cutting technology, starts from the pressure pump, passes through the high-pressure pipe, and then shoots out from the cutting nozzle. Under the control of the computer, the workpiece can be arbitrarily carved, which is less affected by the material

There is a relation between the cutting speed and the garnet mesh. Bigger mesh abrasive can make the cutting process slightly faster. However, you will get a rough finish. The most commonly chosen option for waterjet cutting is 80 mesh. The abrasive size does not have much impact on the thin aluminu