High Friction Surface Treatment is a cost-effective approach to address areas on roadways, such as horizontal curves, intersections or bridges, that demand higher friction in order to reduce vehicle skidding and save lives. The application process requires broadcasting the aggregate either by hand o

1. Storage conditionsThe storage of bauxite fine powder requires low temperature, low humidity, and good ventilation. Usually, the most suitable storage temperature is 15-25 ℃ and the relative humidity is not higher than 60%. At the same time, in order to prevent long-term storage from causing the f

High friction surfacing is a highly effective surface treatment which can increase the skid resistance.After processing, calcined bauxite has better physical hardness and stability, thereby improving its own excellent resistance to abrasion, and is an ideal choice for high friction surface coatings.

The bauxite used in the refractory industry usually refers to bauxite clinker, and the extracted bauxite needs to be satin fired to become clinker. After firing, bauxite can reduce the proportion of impurities in the raw ore and further improve its water absorption, density, and fire resistance. Cli

Calcined bauxite is used globally for its anti-skid and high friction properties to make roadways safer. It is a strong and highly durable material, which makes it ideal to prevent slips on factory floors and other surfaces.

Aggregates are critical to the skid-resistance of the Antiskid High Friction Road Surface system. The surface of the aggregate provides the micro-texture, which directly affects the skid resistance. Two of the key properties of aggregates used are polish resistance (generally reported in terms of po

The purpose of a refractory material is to withstand the high temperatures required in furnaces, kilns, incinerators, power plants etc without contaminating other materials and to conserve heat in the area where it is needed. Dense refractories are heavy with low porosity but high mechanical strengt

Fire—without it, life as we know it would be impossible. How do we control fire? The answer is refractories. From petrochemical plants to your neighborhood pizza parlor, refractories are everywhere.In addition to being resistant to thermal stress and other physical phenomena induced by heat, refract

SEPPE calcined bauxite is an ideal aggregate for anti-skid applications. It is used extensively for vehicle skid prevention and on surfaces requiring additional safety. The bauxite may be trowelled into fresh concrete, added to paints or applied to surfaces using resin cements and adhesives.Besides,

Bauxite is a natural, very hard mineral used predominantly in road systems for its high-friction and anti-skid properties. Its hardness is also beneficial in internal and external industrial flooring applications where a very hard and long lasting mineral is required to give high-friction, anti-slip