SEPPE Advantages in Waterjet Cutting Garnet comes in two basic forms, crushed and alluvial, the later being roughly similar to sand washed up on riversides. Our garnet for export is produced from our crystalline almandite garnet deposits.

What is Water Jet Cutting?There are two options to the process.Pure WaterPressurise water to 60,000 psi (3,600 bar) then project it through an orifice. This creates a significant amount of energy concentrated in a narrow jet of water, travelling at close to the speed of sound.

Brown fused alumina Use Castable 1.Iron casting material Suitable for large, medium-sized blast furnace iron groove has a plurality of tap-hole of main slag line area, hot metal area, ditch, slag ditch, ditch lining swing.

Bauxite is an ore which principally consists of either Boehmite (a mono-hydrate of alumina, Al2O3.H2O) or Gibbsite (alumina trihydrate, Al2O3.3H2O.). Raw bauxite may contain other impurities such as titania, silica and ferrous oxide.

Brown Fused Alumina is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2000°C. A slow solidification process follows the fusion, to yield blocky crystals.

With its increased bauxite content, It exhibits superior crush resistance and conductivity under higher closure pressures than lightweight ceramic proppants.It delivers solid and reliable performance in intermediate depth oil and gas wells with low to moderate permeability.

Heavier and harder than other blasting abrasives, garnet abrasives provide increased durability. These abrasives can be recycled efficiently and they cut faster, which reduces a project’s time and cost. Garnet abrasives are natural and inert, and they contain no heavy metals.

High hardness.Garnet will last a long time, making it a very cost effective sandblasting abrasive. Mohs Hardness is 7 to 8 depending on the type.

Cenospheres Used for Concrete CountertopsWhat Is A Cenosphere?Like fly ash, cenospheres are naturally occurring by-products of the burning process at coal-fired power plants. Unlike fly ash though, cenospheres are lightweight, inert, hollow spheres comprised largely of silica and alumina and filled

Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality abrasive bauxite as raw material.It is characterized by good self-sharpening and high grinding ability. Brown Fused Alumina can produce ceramic grinding wheel ,resinoid grinding wheel.And BFA could be used for abrasive、sandblasting.