You are here: Home » News

waterjet garnet

The articles shown below are all about the waterjet garnet, through these related articles, you can get relevant information, notes in use, or latest trends about the waterjet garnet. We hope these news will give you the help you need. And if these waterjet garnet articles can't solve your needs, you can contact us for relevant information.
  • Does Garnet Mesh Size Have An Effect On The Cutting Speed
    29-06-2023
    There is a relation between the cutting speed and the garnet mesh. Bigger mesh abrasive can make the cutting process slightly faster. However, you will get a rough finish. The most commonly chosen option for waterjet cutting is 80 mesh. The abrasive size does not have much impact on the thin aluminu
  • Key Method to Cut Down Repairs to Your Waterjet
    12-04-2023
    Always keep the working environment free of dust and debris. Especially in the case of waterjets as they are operated in an environment filled with garnet abrasives. So, you have to be cautious about keeping everything clean as much as you can. This will significantly reduce your repair and maintena
  • How Does Dust Affect Cutting Performance?
    20-03-2023
    If garnet contains dust, the fine particles easily accumulate in the garnet feed and hopper. Over time, the dirt can slow cutting, clog the nozzles and cause unplanned downtime. It can even damage the delicate parts you're waterjet cutting.Besides,dust can create unnecessary static electricity. Stat
  • Difference Between Garnet Sand And Quartz Sand
    10-03-2023
    Garnet sand is a naturally processed natural abrasive with high hardness and Mohs hardness of 7.5-8; Garnet sand has sharp sharp corners and forms a certain roughness on the surface of the sandblasted object, which is also beneficial to the adsorption of the coating, so as to achieve better sandblas
  • Basic Parameters Of SEPPE Garnet Sand
    20-02-2023
    Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot.
  • What Is Water Cutting
    13-02-2023
    One of the main conditions for achieving waterjet cutting is garnet abrasive, which has high grinding efficiency, wear resistance and durability, is not easy to jam the nozzle, and has high surface brightness.
  • The Benefits Of Garnet Sand Used For Watercutting
    06-02-2023
    Water cutting is a cutting method with excellent performance. The main advantage is that it will not generate heat, and the cutting speed is very fast. In addition, the complexity of the cutting pattern is difficult to achieve by other methods.
  • Advantages of Garnet Abrasive in Water Cutting
    18-01-2023
    Waterjet cutting, that is, high-pressure water jet cutting technology, starts from the pressure pump, passes through the high-pressure pipe, and then shoots out from the cutting nozzle. Under the control of the computer, the workpiece can be arbitrarily carved, which is less affected by the material
  • Garnet delivery and refractory materials reservation
    27-12-2022
    Near the end of the year, all the garnet abrasives will be delivered before January 10. Due to the Chinese New Year holiday in January, all logistics will be off.All garnet abrasive orders and refractory production orders will start after the holidays.If you have any demand, please contact us in tim
  • Advantage Of SEPPE Garnet Sand
    11-11-2022
    Advantages of SEPEE Garnet in Sandblasting and Waterjet Cutting
  • Total 3 pages  Go to Page
  • Go