(1) Humidity of the air during garnet sandblastingWhen the relative humidity in the air reaches 85% or the surface temperature of the object blasted with garnet sand is less than 3℃, the blasting operation shall be stopped.(2) Time interval of garnet sand blasting and paintingGenerally speaking, pai

Waterjet cutting, that is, high-pressure water jet cutting technology, starts from the pressure pump, passes through the high-pressure pipe, and then shoots out from the cutting nozzle. Under the control of the computer, the workpiece can be arbitrarily carved, which is less affected by the material

1： Specific gravity: also called relative density, the specific gravity of iron aluminum garnet abrasive is 4.1-4.2g/cm3.2： Wear rate: the lower the wear rate of garnet abrasive, the longer its service life.3： Hardness: that is, Mohs hardness. The hardness of garnet abrasive indicates its wear resis

Because the diameter of the common waterjet cutting nozzle is very small, and it must be mixed with the high-speed water flow through the sand channel pipe to obtain high-speed and strong kinetic energy for cutting and processing operations, which also makes it impossible to block the sand channel p

Refractory materials are the basic materials for high-temperature industrial kilns and facilities. They are mainly used in the fields of refractory insulation and thermal insulation of kiln linings and facilities in metallurgy, petrochemical, non-ferrous metals, building materials, machinery manufac

Water jet cutting is to mix garnet sand abrasive into water jet to form abrasive jet to cut metal or other materials.After the equipment operation is completed, there will be some waste sand in the water tank, which is not easy to get out, which adds a lot of trouble to the operators.There are sever

Grain size of garnet abrasiveThere are coarse, medium and fine grains in the grain size of garnet abrasive. Practice has proved that the grinding capacity of the grinding powder after centrifugal separation will be 20% higher than that before separation. Fine particles play a very small role in grin

The difference between Brown Fused Alumina and White Fused Alumina.

GARNET, AN IDEAL ABRASIVE FOR SANDBLASTING AND WATERJET CUTTING.

In China, there are 3 main types of crusher/mill for BFA, which are Roller, Bamarc and Ball Mill, and the first two of them are the mostly used by producers.