Garnet sand as an abrasive sand, its main area of use is high-pressure water jet cutting. In addition, many customers use garnet sand for sweeping zinc-plated parts or for cleaning building exteriors. For example:Manufacturing/Maintenance/Bridges, Pipelines, Oil Refineries/Rail Yards, Ship Yards, St

The calcined bauxite can be processed into bauxite sand and bauxite powder of different particle sizes, both of which can be directly used as refractory sand,cement,firebricks, etc.It has a very high status in the field of refractory materials.

Garnet sand has different sizes for customers' need.For waterjet cutting，60mesh，80 and 120mesh are very suitable.Garnet sand 60 Mesh brings the most powerful cutting performance and speed used when cutting speed is more important than edge quality. Such as cutting thick stainless steel, stone or mar

Garnet sand is a green and environment-friendly abrasive because it does not contain free silicon and will not cause occupational harm to the body of sandblasting workers. Most importantly, due to the high hardness of garnet sand, if there is a good recovery system, it can be reused for many times.

Garnet sand is a naturally processed natural abrasive with high hardness and Mohs hardness of 7.5-8; Garnet sand has sharp sharp corners and forms a certain roughness on the surface of the sandblasted object, which is also beneficial to the adsorption of the coating, so as to achieve better sandblas

Oilfield service companies fracture a well involving pumping a fracturing fluid containing proppant into a well and into an oil or gas reservoir generally using high rate and pressure. Pumping continues until fractures are initiated and desired fracture geometry is achieved. The proppants, which are

Fluorite powder is a powdery material formed from fluorite after grinding, flotation, dehydration and drying. It can be divided into four grades according to different uses, namely metallurgical grade, glass-ceramic grade, acid grade (chemical grade) and optical grade.

The formation of cenosphere involves four steps, namely decomposition, sintering, melting and cooling1. Coal-fired power plants grind coal into pulverized coal and spray it into the furnace of power generation boiler to make it suspend for combustion.2. Most of the combustible components of coal (ca

The spring is bright, the breeze is blowing, and sports represent youth,SEPPE is heading for the future.In order to enrich the staff's amateur cultural life and practice the concept of national fitness, some employees of SEPPE actively participated in the third Blue Whale Cross-country Challenge in

Because the brown corundum contains Fe (iron), the quality of brown corundum can be differentiated by color. The color of brown corundum is usually brown and transparent. The color of brown corundum with high aluminum content is lighter, and the transparency of shiny brown corundum in the sun is ver