Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed.

Bauxite clinker is a solid material calcined at high temperature in rotary kiln. The main purpose of calcination is to remove crystal water and increase alumina content.The clinker is gray, light yellow and dark gray bauxite clinker. According to specifications, bauxite clinker can be divided into p

Waterjet sand, full name of water jet cutting abrasive. Mixing sand into water flow to form waterjet abrasives to cut metal or other materials. Waterjet sand with particle size of 30-150 mesh is usually used as abrasives. Garnet with particle size of 80-100 mesh is the most commonly used.The propert

High quality, high purity or synthetic refractory raw materials are the basis of manufacturing refractory castables and producing high efficiency unshaped refractory materials. Such as corundum, mullite, calcined bauxite, high alumina clinker, etc.Refractory castables is made of high quality bauxite

"Prevention first, life first"On November 8, 2023, Xinghai Center held a fire propaganda speech. SEPPE actively participated in the publicity activities in order to cooperate with the national consumer safety publicity and improve the safety awareness of our employees.The national fire safety public

Polishing is to remove the irregular impurities parts on the surface of an object by mechanical friction, so as to obtain a smooth and smooth surface treatment. BFA grit has high hardness and resistance, which means it has excellent wear performance to polish. Grit polishing is widely used in many f

The molten iron just entering the furnace is above1250-1350 temperature. The freezing point of molten steel is 1064℃, and the smelting point of steel is 1500℃.The steelmaking furnace is full of smolten steel. Why won't it be melted too just like the steel? The reason is that the coatings containing

The reason why high-alumina raw materials is selected to produce refractory bricks is that its high resistance to temperature increases with the elevation of Al2O3 content.With the decrease of impurity content in raw materials, fire resistance is improved. At the same time, if the aluminum content o

Bauxite can be manufactued in to high al2o3 products. High hardness, refractoriness and low loss. The hardness of bauxite products is related to alumina content. The higher the alumina content, the higher the refractoriness. In other words, the refractory effect is excellent. Bauxite products have h

Garnet waterjet cutting sand is mainly to spray it at high speed to achieve the purpose of cutting. And the cutting strength of garnet sand is thousands of times that of pure waterjet. This way has a wider cutting range, and can cut hard objects such as metals, ceramics, composite materials and sto